AerialWorkPlatforms.net

PRODUCT URL:

https://www.aerialworkplatforms.net/product-category/scissor-lifts/

1532ES Electric Scissor Lift

1532ES Electric Scissor Lift

1532ES Electric Scissor Lifts

  • €Fully proportional drive and lift controls
  • No-maintenance scissor bearings
  • Roll-out deck extension with incremental locking positions
  • Non-skid, steel deck construction
  • Large sheet loading entrance
  • Single arm scissor provides easy access for maintenance. No need for swing-out stations or tight working conditions.
  • Patented Powerlift2  elevating system – built strong and works tough
  • High torque power package
  • Compact design fits in small and tight work areas

1532ES Electric Scissor Lifts Features:
Work Area

  • Roll-out deck extension with incremental locking positions
  • Large sheet loading entrance accommodates 48€(1.22 m) material
  • 110V Power to Platform
  • Combination of wide beams and large pins in self-lubricating bearings for larger load bearing surface in scissor pivot areas

Performance

  • Fully Proportional Drive and Lift Controls
  • High Torque Power Package

Engine/Power

  • Four 6V 220Ah Industrial Deep Cycle Batteries

Serviceability

  • Lubrication-Free Scissor Bearings
  • Specially designed hydraulic swivel fittings to reduce hydraulic hose binding and hose failure
  • Easy maintenance access to mechanical and electrical components without raising platform or swinging out trays
  • Logically grouped components and numbered wiring for easy reference

Safety

  • Dedicated compartments protect electrical and hydraulic components
  • Emergency shut-off at platform and lower controls
  • Non-Skid Steel Deck Construction
  • Motion Alarm
  • Drive Speed Interlock
  • Multi-Axis Tilt Sensor
  • Multiple Disc Brakes, manual brake release
  • Scissor Maintenance Lock
  • Dual Automatic Parking Brake
  • Automatic Pothole Protection

 
Aerial Work Platforms is YOUR total Aerial Access Solution Provider.


1932ES Electric Scissor Lift

1932ES Electric Scissor Lift

1932ES Electric Scissor Lifts

  • Fully proportional drive and lift controls
  • No-maintenance scissor bearings
  • Roll-out deck extension with incremental locking positions
  • Non-skid, steel deck construction
  • Large sheet loading entrance
  • Single arm scissor provides easy access for maintenance. No need for swing-out stations or tight working conditions.
  • Patented Powerlift2 elevating system – built strong and works tough
  • High torque power package
  • Compact design fits in small and tight work areas

1932ES Electric Scissor Lift Features:

Work Area

  • Roll-out deck extension with incremental locking positions
  • Large sheet loading entrance accommodates 48€ (1.22 m) material
  • 110V Power to Platform
  • Combination of wide beams and large pins in self-lubricating bearings for larger load bearing surface in scissor pivot areas

Performance

  • Fully Proportional Drive and Lift Controls
  • High Torque Power Package
  • Engine/Power
  • Four 6V 220Ah Industrial Deep Cycle Batteries

Serviceability

  • Lubrication-Free Scissor Bearings
  • Specially designed hydraulic swivel fittings to reduce hydraulic hose binding and hose failure
  • Easy maintenance access to mechanical and electrical components without raising platform or swinging out trays
  • Logically grouped components and numbered wiring for easy reference

Safety

  • Dedicated compartments protect electrical and hydraulic components
  • Emergency shut-off at platform and lower controls
  • Non-Skid Steel Deck Construction
  • Motion Alarm
  • Drive Speed Interlock
  • Multi-Axis Tilt Sensor
  • Multiple Disc Brakes, manual brake release
  • Scissor Maintenance Lock
  • Dual Automatic Parking Brake
  • Automatic Pothole Protection

 

 

Aerial Work Platforms is YOUR total Aerial Access Solution Provider.


1932RS Electric Scissor Lift 1

1932RS Electric Scissor Lift

1932RS Electric Scissor Lift

1932RS Electric Scissor Lift Features:

  • Passive pothole protection eliminates all moving parts in the pothole protection system, reducing the need for repair or replacement
  • Ability to traverse grades of up to 25%
  • Innovative operator controls, similar to the ES Series, and compact dimensions enable travel through doorways
  • The direct electric drive delivers industry-leading duty cycles
  • Leak points are minimized with a design that includes 4 hydraulic hoses
  • Battery storage areas are easily accessible and have no drawers to pull out

Quick Specs:

  • Platform Height Elevated – 19 ft
  • Overall Width – 32 in
  • Platform Capacity – 500 lb

 

 

Aerial Work Platforms is YOUR total Aerial Access Solution Provider.


2030ES Electric Scissor Lift 1

2030ES Electric Scissor Lift

2030ES Electric Scissor Lift- This Product has been Discontinued

2030ES Electric Scissor Lift Features:

  • Quieter, cleaner operation for a variety of environments
  • Electric drive and integrated components with only two hydraulic hoses and four hydraulic fittings on the entire machine will keep you on the job longer and reduce your operating costs by reducing chances for leaks and service calls
  • Narrow width fits through most standard doorways and tight aisles

Quick Specs:

  • Platform Height Elevated – 20 ft
  • Overall Width – 30 in
  • Platform Capacity – 800 lb

 

 

Aerial Work Platforms is YOUR total Aerial Access Solution Provider.


2033ES Electric Scissor Lift

2033ES Electric Scissor Lift

2033ES Electric Scissor Lift

  •  Fully proportional drive and lift controls
  •  No-maintenance scissor bearings
  •  Roll-out deck extension with incremental locking positions
  •  Non-skid, steel deck construction
  •  Large sheet loading entrance
  •  Single arm scissor provides easy access for maintenance. No need for swing-out stations or tight working conditions.
  •  Patented Powerlift2 elevating system – built strong and works tough
  •  High torque power package
  •  Bigger platform with the longest deck extension
  •  Extremely low entry height
  •  Narrow design fits easily through aisles and doorways

2033ES Electric Scissor Lift Features:

Work Area

  • Roll-out deck extension with incremental locking positions
  • Large sheet loading entrance accommodates 48€ (1.22 m) material
  • 110V Power to Platform
  • Combination of wide beams and large pins in self-lubricating bearings for larger load bearing surface in scissor pivot areas

Performance

  • Fully Proportional Drive and Lift Controls
  • High Torque Power Package
  • Maneuvers well through narrow aisles
  • Engine/Power
  • Four 6V 220Ah Industrial Deep Cycle Batteries

Serviceability

  • Lubrication-Free Scissor Bearings
  • Specially designed hydraulic swivel fittings to reduce hydraulic hose binding and hose failure
  • Easy maintenance access to mechanical and electrical components without raising platform or swinging out trays
  • Logically grouped components and numbered wiring for easy reference

Safety

  • Dedicated compartments protect electrical and hydraulic components
  • Emergency shut-off at platform and lower controls
  • Non-Skid Steel Deck Construction
  • Motion Alarm
  • Drive Speed Interlock
  • Multi-Axis Tilt Sensor
  • Multiple Disc Brakes, manual brake release
  • Scissor Maintenance Lock
  • Dual Automatic Parking Brake
  • Automatic Pothole Protection

 

 

 

Aerial Work Platforms is YOUR total Aerial Access Solution Provider.


2591ES Electric Scissor Lift

2591ES Electric Scissor Lift

2591ES Electric Scissor Lifts –

This Product Has Been Discontinued

 

  • Fully proportional drive and lift controls
  • No-maintenance scissor bearings
  • Roll-out deck extensions with incremental locking positions
  • Non-skid steel deck construction
  • Large sheet loading entrance
  • Easy maintenance access without raising platform or swing-out trays
  • Quad-Trax„ 4wd power package
  • Outrigger support for platform stability on heavy duty jobs sites with €œone-touch€ auto leveling
  • Powered by eight 6V 375Ah Industrial, deep cycle batteries
  • Oscillating rear axle with 12€ (30.48 cm) ground clearance

2591ES Electric Scissor Lift Features:

Work Area

  • Roll-out deck extension with incremental locking positions
  • Large sheet loading entrance accommodates 48€ (1.22 m) material
  • 110V Power to Platform
  • Combination of wide beams and large pins in self-lubricating bearings for larger load bearing surface in scissor pivot areas

Performance

  • Fully proportional drive and lift controls
  • Oscillating rear axle with 12€ (30.48 cm) ground clearance
  • Quad-Trax„ 4wd Power Package
  • Engine/Power
  • Eight 6V 375 Ah Industrial, Deep Cycle Batteries

Serviceability

  • Lubrication-Free Scissor Bearings
  • Easy maintenance access to mechanical and electrical components without raising platform or swinging out trays
  • Logically grouped components and numbered wiring for easy reference

Safety

  • Dedicated compartments protect electrical and hydraulic components
  • Non-Skid Steel Deck Construction
  • Motion Alarm
  • Drive Speed Interlock
  • Multi-Axis Tilt Sensor
  • Multiple Disc Brakes, manual brake release
  • Scissor Maintenance Lock
  • Dual Automatic Parking Brake
  • Emergency shut off at platform and lower controls

 

2591ES Electric Scissor Lift Specifications:

 

 Length  144 in. (3.66 m)
 Height  Working: 31 ft. (9.62 m)
Maximum Drive: 25 ft. (7.62 m)
Stowed (Top Guardrail): 100.5 in. (2.55 m)
Stowed (Rails Folded): 71 in. (1.8 m)
Guardrail: 44.5 in. (1.13 m)
Toeboard: 7 in. (18 cm)
 Width  91 in. (2.31 m)
 Weight  8,600 lbs. (3,900 kg)
 Ground Clearance  12 in. (30.48 cm)
 Wheelbase  102.5 in. (2.6 m)
 Turning Radius  Inside: 76 in. (1.93 m)
Outside: 195 in. (4.95 m)
 ENGINE & DRIVETRAIN
 Drive System  Planetary, 2-speed wheel motors
 ELECTRICAL
 Motor  Electric
 BATTERY
 Battery  (8) 6V 375Ah industrial deep cycle
 HYDRAULICS
 Hydraulic Tank Capacity  23 gal. (87 l)
 PERFORMANCE
 Tires  12 – 16.5 NHS outrigger
 Travel Speed  Stowed: 2.6 mph (4.2 km/h)
Raised: 0.5 mph (0.8 km/h)
 Gradeability  40%
 Capacity  Lift: 2,000 lbs. (907 kg)
Roll-Out Deck: 500 lbs. (227 kg)
 Platform Height  25 ft. (7.62 m)
57 in. (1.45 m) entry height
 Platform Size  Extended Length: 180 in. (4.57 m)
Retracted Length: 132 in. (3.35 m)
Roll-Out Deck: 48 in. (1.22 m)
 Raise/Lower Time  24/28 sec.

 

 

 

Aerial Work Platforms is YOUR total Aerial Access Solution Provider.


2591RT Rough Terrain Scissor Lift

2591RT Rough Terrain Scissor Lift

2591RT Rough Terrain Scissor Lift –

This Product Has Been Discontinued

  • Fully proportional drive and lift controls
  • No-maintenance scissor bearings
  • Roll-out deck extensions with incremental locking positions
  • Non-skid steel deck construction
  • Large sheet loading entrance
  • Easy maintenance access without raising platform or swing-out trays
  • Quad-Trax„ 4wd power package
  • Outrigger support for platform stability on heavy duty jobs sites with €œone-touch€ auto leveling
  • Powered by liquid-cooled engine
  • Multiple fuel selections(gasoline/liquid propane or diesel)
  • Oscillating rear axle with 12€ (30.48 cm) ground clearance

2591RT Rough Terrain Scissor Lift Features:

Work Area

  • Roll-out deck extension with incremental locking positions
  • Large sheet loading entrance accommodates 48€(1.22 m) material
  • 110V Power to Platform
  • Combination of wide beams and large pins in self-lubricating bearings for larger load bearing surface in scissor pivot areas

Performance

  • Fully proportional drive and lift controls
  • Oscillating rear axle with 12€ (30.48 cm) ground clearance
  • Quad-Trax„ 4wd Power Package
  • Engine/Power
  • Multiple Fuel Selections (gasoline/liquid propane or diesel)
  • Liquid-Cooled Engine

Serviceability

  • Lubrication-Free Scissor Bearings
  • Easy maintenance access to mechanical and electrical components without raising platform or swinging out trays
  • Logically grouped components and numbered wiring for easy reference

Safety

  • Dedicated compartments protect electrical and hydraulic components
  • Non-Skid Steel Deck Construction
  • Motion Alarm
  • Drive Speed Interlock
  • Multi-AxisTilt Sensor
  • Multiple Disc Brakes, manual brake release
  • Scissor Maintenance Lock
  • Dual Automatic Parking Brake
  • Emergency shut off at platform and lower controls

 

 

 

Aerial Work Platforms is YOUR total Aerial Access Solution Provider.


260MRT Scissor Lift 1

260MRT Scissor Lift

260MRT Scissor Lift

260MRT Scissor Lift  Features:

  • Narrow 69 in chassis fits into spaces other scissor lifts can’t
  • Large work platform and 1,250 lb platform capacity so you can be more productive
  • Standard four wheel drive and 35 percent gradeability keep you going

Quick Specs:

  • Platform Height Elevated – 26 ft
  • Overall Width – 5 ft 9 in
  • Platform Capacity – 1,250 lb

 

 

Aerial Work Platforms is YOUR total Aerial Access Solution Provider.


2630ES Electric Scissor Lift

2630ES Electric Scissor Lift

2630ES Electric Scissor Lift

2630ES Electric Scissor Lift Features:

  • Quieter, cleaner operation for a variety of environments
  • Electric drive and integrated components with only two hydraulic hoses and four hydraulic fittings on the entire machine will keep you on the job longer and reduce your operating costs by reducing chances for leaks and service calls
  • Tight turning radius for great maneuverability
Quick Specs:
  • Platform Height Elevated – 25 ft 6 in
  • Overall Width – 30 in
  • Platform Capacity – 500 lb / 800 lb

 

Aerial Work Platforms is YOUR total Aerial Access Solution Provider.


2633ES Electric Scissor Lift

2633ES Electric Scissor Lift

2633ES Electric Scissor Lift

 

  •  Fully proportional drive and lift controls
  •  No-maintenance scissor bearings
  •  Roll-out deck extension with incremental locking positions
  •  Non-skid, steel deck construction
  •  Large sheet loading entrance
  •  Single arm scissor provides easy access for maintenance. No need for swing-out stations or tight working conditions.
  •  Patented Powerlift2 elevating system – built strong and works tough
  •  High torque power package
  •  Bigger platform with the longest deck extension
  •  Extremely low entry height
  •  Narrow design fits easily through aisles and doorways

2633ES Electric Scissor Lifts Features:

Work Area

  • Roll-out deck extension with incremental locking positions
  • Large sheet loading entrance accommodates 48€ (1.22 m) material
  • 110V Power to Platform
  • Combination of wide beams and large pins in self-lubricating bearings for larger load bearing surface in scissor pivot areas

Performance

  • Fully Proportional Drive and Lift Controls
  • High Torque Power Package
  • Maneuvers well through narrow aisles
  • Engine/Power
  • Four 6V 220Ah Industrial Deep Cycle Batteries

Serviceability

  • Lubrication-Free Scissor Bearings
  • Specially designed hydraulic swivel fittings to reduce hydraulic hose binding and hose failure
  • Easy maintenance access to mechanical and electrical components without raising platform or swinging out trays
  • Logically grouped components and numbered wiring for easy reference

Safety

  • Dedicated compartments protect electrical and hydraulic components
  • Emergency shut-off at platform and lower controls
  • Non-Skid Steel Deck Construction
  • Motion Alarm
  • Drive Speed Interlock
  • Multi-Axis Tilt Sensor
  • Multiple Disc Brakes, manual brake release
  • Scissor Maintenance Lock
  • Dual Automatic Parking Brake
  • Automatic Pothole Protection

 

 

Aerial Work Platforms is YOUR total Aerial Access Solution Provider.


2646ES Electric Scissor Lift 1

2646ES Electric Scissor Lift

2646ES Electric Scissor Lift

2646ES Electric Scissor Lift Features:

  • Quieter, cleaner operation for a variety of environments
  • Electric drive and integrated components with only two hydraulic hoses and four hydraulic fittings on the entire machine will keep you on the job longer and reduce your operating costs by reducing chances for leaks and service calls
  • Tight turning radius for great maneuverability

Quick Specs:

  • Platform Height Elevated – 26 ft
  • Overall Width – 46 in
  • Platform Capacity – 1,000 lb

 

 

Aerial Work Platforms is YOUR total Aerial Access Solution Provider.


2647ES Electric Scissor Lift 1

2647ES Electric Scissor Lift

2647ES Electric Scissor Lift

2647ES Electric Scissor Lift Specifications:

  •  Fully proportional drive and lift controls
  •  No-maintenance scissor bearings
  •  Roll-out deck extension with incremental locking positions
  •  Non-skid, steel deck construction
  •  Large sheet loading entrance
  •  Single arm scissor provides easy access for maintenance. No need for swing-out stations or tight working conditions.
  •  Patented Powerlift2 elevating system – built strong and works tough
  •  High torque power package
  •  Higher capacity (up to 1,250 lbs/566 kg) expands applications and productivity

2647ES Electric Scissor Lifts Features:

Work Area

  • Roll-out deck extension with incremental locking positions
  • Large sheet loading entrance accommodates 48€ (1.22 m) material
  • 110V Power to Platform
  • Combination of wide beams and large pins in self-lubricating
  • bearings for larger load bearing surface in scissor pivot areas
  • Extra wide platform for spacious work area

Performance

  • Fully Proportional Drive and Lift Controls
  • High Torque Power Package
  • Engine/Power
  • Four 6V 220Ah Industrial Deep Cycle Batteries (245Ah on 3247ES)

Serviceability

  • Lubrication-Free Scissor Bearings
  • Specially designed hydraulic swivel fittings to reduce hydraulic hose binding and hose failure
  • Easy maintenance access to mechanical and electrical components without raising platform or swinging out trays
  • Logically grouped components and numbered wiring for easy reference

Safety

  • Dedicated compartments protect electrical and hydraulic components
  • Emergency shut-off at platform and lower controls
  • Non-Skid Steel Deck Construction
  • Motion Alarm
  • Drive Speed Interlock
  • Multi-Axis Tilt Sensor
  • Multiple Disc Brakes, manual brake release
  • Scissor Maintenance Lock
  • Dual Automatic Parking Brake
  • Automatic Pothole Protection

2647ES Electric Scissor Lift Dimensions:

 Length  99 in. (2.51 m)
 Height  Working: 32 ft. (9.92 m)
Platform: 26 ft. (7.92 m)
Stowed (Top Guardrail): 88.75 in. (2.25 m)
Stowed (Rails Folded): 70 in. (1.78 m)
 Width  47 in. (1.19 m)
 Weight  5,300 lbs. (2,404 kg)
 Ground Clearance  3.5 in. (8.89 cm)
0.75 in. (1.9 cm)
 Wheelbase  71 in. (1.8 m)
 Turning Radius  Inside: Zero
Outside: 94 in. (2.4 m)
 ENGINE & DRIVETRAIN
 Horsepower  4 hp (2.98 kW) @ 3,000 rpm
 Drive System  Proportional drive and lift controls
Axle: Dual front wheel hydraulic
 ELECTRICAL
 Motor  Electric
 BATTERY
 Battery  (4) 6V deep cycle, 220Ah @ 20 hr. rating
 HYDRAULICS
 Hydraulic Tank Capacity  4.5 gal. (17 l)
 Operating Pressure  Main: 2,750 psi (190 bar)
Lift: 2,500 psi (172.4 bar)
Steer: 900 psi (62 bar)
 PERFORMANCE
 Tires  Solid, non-marking rubber
16 x 5 in. (40.64 x 12.7 cm)
 Tracks  Wheel: 41 in. (1.04 m)
 Travel Speed  Raised: 0.62 mph (1 km/h)
Stowed: 2.5 mph (4 km/h)
 Gradeability  25%
 Capacity  3 occupants
Lift: 1,000 lbs. (454 kg) evenly distributed
Roll-Out Deck: 250 lbs. (113 kg)
 Platform Height  Guardrail: 43.4 in. (1.1 m)
Toeboard: 6 in. (15 cm)
 Platform Size  Extended Length: 133.5 in. (33.9 m)
Retracted Length: 91 in. (2.31 m)
Roll-Out Deck: 42.1 in. (1.07 m)
 Raise/Lower Time  30/35 sec.

Aerial Work Platforms is YOUR total Aerial Access Solution Provider.


2659ERT DC Battery Powered Scissor Lift

2659ERT DC Battery Powered Scissor Lift

2659ERT DC Battery Powered Scissor Lift

2659ERT DC Battery Powered Scissor Lift Specifications:

  • 26- and 32-ft (8- and 9.75-m) Platform Heights
  • Fully Proportional Drive & Lift Controls
  • Rough Terrain Capability
  • Paired With Slab Size & Sensibility
  • 4-Wheel Drive, 48v DC Power
  • 59€ (150 cm) Overall Width
  • No-Maintenance Scissor Bearings
  • Roll-Out Deck Extension with Incremental Lock Positions
  • Standard Integrated
  • Sheet Material Rack
  • Patented Powerlift2 Scissor System – Built Strong, Works Tough
  • Outrigger Support For Platform

2659ERT DC Battery Powered Features:

Work Area

  • Roll-out deck extension with incremental locking positions
  • Large sheet loading entrance accommodates
  • 48€ (1.22 m) material
  • 110V Power to Platform
  • Integrated sheet material rack designed and approved by the manufacturer

Performance

  • 4-Wheel Drive,48v DC Power
  • Fully Proportional Drive and Lift Controls

Power

  • Eight 6V 250 Ah Industrial Deep Cycle Batteries

Serviceability

  • Lubrication-FreeScissor Bearings
  • Easy maintenance access to mechanical and electrical components without raising platform or swinging out trays
  • Logically grouped components and numbered wiring for easy reference

Safety

  • Dedicated compartments protect electrical and hydraulic components
  • Emergency shut off at platform and lower controls
  • Non-Skid Steel Deck Construction
  • Descent Alarm
  • DriveSpeed Interlock
  • Multi-AxisTilt Sensor
  • Multiple Disc Brakes, manual brake release
  • Scissor Maintenance Lock
  • Dual Automatic Parking Brake
  • Automatic Pothole Protection

  

2659ERT DC Electric Scissor Lift Dimensions:

 Length  105 in. (2.67 m)
99 in. (2.5 m) without step
 Height  Working: 32 ft. (9.92 m)
Maximum Drive: 26 ft. (7.92 m)
Stowed (Top Guardrail): 90 in. (2.29 m)
Stowed (Rails Folded): 75 in. (1.9 m)
Guardrail: 43-3/8 in. (1.1 m)
Toeboard: 6 in. (15 cm)
 Width  59 in. (1.5 m)
 Weight  6,065 lbs. (2,750 kg)
 Ground Clearance  6 in. (15 cm)
 Wheelbase  82 in. (2.1 m)
 Turning Radius  Inside: 59 in. (1.5 m)
 BATTERY
 Battery  48V DC, 250Ah battery pack
 HYDRAULICS
 Hydraulic System  4-wheel drive
 PERFORMANCE
 Tires  23 x 10.5 in. (58 x 26.7 cm)
 Travel Speed  Stowed: 3.2 mph (5.1 km/h)
Raised: 0.4 mph (0.65 km/h)
 Gradeability  35% / 19°
 Capacity  3 person, 750 lbs. (340 kg)
Lift: 1,000 lbs. (450 kg)
Roll-Out Deck: 250 lbs. (113 kg)
Sheet Rack: 250 lbs. (113 kg)
 Platform Height  26 ft. (7.92 m)
45 in. (1.15 m) floor
 Platform Size  Extended Length: 133.5 in. (3.39 m)
Retracted Length: 91 in. (2.31 m)
Roll-Out Deck: 42.25 in. (1.07 m)
Width: 46 in. (1.17 m)
Sheet Rack: 8 in. (20 cm)

Aerial Work Platforms is YOUR total Aerial Access Solution Provider.


3246ES Electric Scissor Lift 1

3246ES Electric Scissor Lift

3246ES Electric Scissor Lift

3246ES Electric Scissor Lift Features:

  • Quieter, cleaner operation for a variety of environments
  • Electric drive and integrated components with only two hydraulic hoses and four hydraulic fittings on the entire machine will keep you on the job longer and reduce your operating costs by reducing chances for leaks and service calls
  • Tight turning radius for great maneuverability

Quick Specs:

  • Platform Height Elevated – 31 ft 9 in
  • Overall Width – 46 in
  • Platform Capacity – 700 lb / 1,000 lb

 

 

Aerial Work Platforms is YOUR total Aerial Access Solution Provider.


3247ES Electric Scissor Lift 1

3247ES Electric Scissor Lift

3247ES Electric Scissor Lift

3247ES Electric Scissor Lift Specifications:

  •  Fully proportional drive and lift controls
  •  No-maintenance scissor bearings
  •  Roll-out deck extension with incremental locking positions
  •  Non-skid, steel deck construction
  •  Large sheet loading entrance
  •  Single arm scissor provides easy access for maintenance. No need for swing-out stations or tight working conditions.
  •  Patented Powerlift2 elevating system – built strong and works tough
  •  High torque power package
  •  Higher capacity (up to 1,250 lbs/566 kg) expands applications and productivity

3247ES Electric Scissor Lifts Features:

Work Area

  • Roll-out deck extension with incremental locking positions
  • Large sheet loading entrance accommodates 48€ (1.22 m) material
  • 110V Power to Platform
  • Combination of wide beams and large pins in self-lubricating bearings for larger load bearing surface in scissor pivot areas
  • Extra wide platform for spacious work area

Performance

  • Fully Proportional Drive and Lift Controls
  • High Torque Power Package
  • Engine/Power
  • Four 6V 220Ah Industrial Deep Cycle Batteries (245Ah on 3247ES)

Serviceability

  • Lubrication-Free Scissor Bearings
  • Specially designed hydraulic swivel fittings to reduce hydraulic hose binding and hose failure
  • Easy maintenance access to mechanical and electrical components without raising platform or swinging out trays
  • Logically grouped components and numbered wiring for easy reference

Safety

  • Dedicated compartments protect electrical and hydraulic components
  • Emergency shut-off at platform and lower controls
  • Non-Skid Steel Deck Construction
  • Motion Alarm
  • Drive Speed Interlock
  • Multi-Axis Tilt Sensor
  • Multiple Disc Brakes, manual brake release
  • Scissor Maintenance Lock
  • Dual Automatic Parking Brake
  • Automatic Pothole Protection

3247ES Electric Scissor Lift Dimensions:

 Length  99 in. (2.51 m)
 Height  Working: 38 ft. (11.75 m)
Platform: 32 ft. (9.75 m)
Stowed (Top Guardrail): 95.25 in. (2.45 m)
Stowed (Rails Folded): 76 in. (1.94 m)
 Width  47 in. (1.19 m)
 Weight  5,990 lbs. (2,717 kg)
 Ground Clearance  3.5 in. (8.89 cm)
0.75 in. (1.9 cm)
 Wheelbase  71 in. (1.8 m)
 Turning Radius  Inside: Zero
Outside: 94 in. (2.4 m)
 ENGINE & DRIVETRAIN
 Horsepower  4 hp (2.98 kW) @ 3,000 rpm
 Drive System  Proportional drive and lift controls
Axle: Dual front wheel hydraulic
 ELECTRICAL
 Motor  Electric
 BATTERY
 Battery  (4) 6V deep cycle, 220Ah @ 20 hr. rating
 HYDRAULICS
 Hydraulic Tank Capacity  4.5 gal. (17 l)
 Operating Pressure  Main: 2,750 psi (190 bar)
Lift: 2,500 psi (172.4 bar)
Steer: 900 psi (62 bar)
 PERFORMANCE
 Tires  Solid, non-marking rubber
16 x 5 in. (40.64 x 12.7 cm)
 Tracks  Wheel: 41 in. (1.04 m)
 Travel Speed  Raised: 0.62 mph (1 km/h)
Stowed: 2.5 mph (4 km/h)
 Gradeability  25%
 Capacity  2 occupants
Lift: 700 lbs. (318 kg) evenly distributed
Roll-Out Deck: 250 lbs. (113 kg)
 Platform Height  Guardrail: 43.4 in. (1.1 m)
Toeboard: 6 in. (15 cm)
 Platform Size  Extended Length: 133.5 in. (33.9 m)
Retracted Length: 91 in. (2.31 m)
Roll-Out Deck: 42.1 in. (1.07 m)
 Raise/Lower Time  42/32 sec.

Aerial Work Platforms is YOUR total Aerial Access Solution Provider.


3248RS Electric Scissor Lift 1

3248RS Electric Scissor Lift

3248RS Electric Scissor Lift

3248RS Electric Scissor Lift Features:

  • Passive pothole protection eliminates all moving parts in the pothole protection system, reducing the need for repair or replacement
  • Ability to traverse grades of up to 25%
  • Innovative operator controls, similar to the ES Series, and compact dimensions enable travel through doorways
  • Battery storage areas are easily accessible and have no drawers to pull out
  • The direct electric drive delivers industry-leading duty cycles
  • Leak points are minimized with a design that includes 4 hydraulic hoses

Quick Specs:

  • Platform Height Elevated – 32 ft
  • Overall Width – 48 in
  • Platform Capacity – 705 lb

 

 

Aerial Work Platforms is YOUR total Aerial Access Solution Provider.


3259ERT DC Battery Powered Scissor Lift 1

3259ERT DC Battery Powered Scissor Lift

3259ERT DC Battery Powered Scissor Lift

3259ERT DC Battery Powered Scissor Lift Specifications:

  • 26- and 32-ft (8- and 9.75-m) Platform Heights
  • Fully Proportional Drive & Lift Controls
  • Rough Terrain Capability
  • Paired With Slab Size & Sensibility
  • 4-Wheel Drive, 48v DC Power
  • 59€ (150 cm) Overall Width
  • No-Maintenance Scissor Bearings
  • Roll-Out Deck Extension with Incremental Lock Positions
  • Standard Integrated
  • Sheet Material Rack
  • Patented Powerlift2 Scissor System – Built Strong, Works Tough
  • Outrigger Support For Platform
  • Stability On Heavy Duty Jobsites with One-Touch Auto Leveling

3259ERT DC Battery Powered Features:

Work Area

  • Roll-out deck extension with incremental locking positions
  • Large sheet loading entrance accommodates
  • 48€ (1.22 m) material
  • 110V Power to Platform
  • Integrated sheet material rack designed and approved by the manufacturer

Performance

  • 4-Wheel Drive,48v DC Power
  • Fully Proportional Drive and Lift Controls

Power

  • Eight 6V 250 Ah Industrial Deep Cycle Batteries

Serviceability

  • Lubrication-FreeScissor Bearings
  • Easy maintenance access to mechanical and electrical components without raising platform or swinging out trays
  • Logically grouped components and numbered wiring for easy reference

Safety

  • Dedicated compartments protect electrical and hydraulic components
  • Emergency shut off at platform and lower controls
  • Non-Skid Steel Deck Construction
  • Descent Alarm
  • Drive Speed Interlock
  • Multi-AxisTilt Sensor
  • Multiple Disc Brakes, manual brake release
  • Scissor Maintenance Lock
  • Dual Automatic Parking Brake
  • Automatic Pothole Protection

 

3259ERT DC Electric Scissor Lift Dimensions:

 Length  105 in. (2.67 m)
99 in. (2.5 m) without step
 Height  Working: 38 ft. (11.75 m)
Maximum Drive: 32 ft. (9.75 m)
Stowed (Top Guardrail): 96 in. (2.44 m)
Stowed (Rails Folded): 82 in. (2.09 m)
Guardrail: 43-3/8 in. (1.1 m)
Toeboard: 6 in. (15 cm)
 Width  59 in. (1.5 m)
 Weight  6,950 lbs. (3,150 kg)
 Ground Clearance  6 in. (15 cm)
 Wheelbase  82 in. (2.1 m)
 Turning Radius  Inside: 59 in. (1.5 m)
 BATTERY
 Battery  48V DC, 250Ah battery pack
 HYDRAULICS
 Hydraulic System  4-wheel drive
 PERFORMANCE
 Tires  23 x 10.5 in. (58 x 26.7 cm)
 Travel Speed  Stowed: 3.1 mph (5 km/h)
Raised: 0.4 mph (0.65 km/h)
 Gradeability  31% / 17°
 Capacity  2 person, 500 lbs. (225 kg)
Lift: 750 lbs. (340 kg)
Roll-Out Deck: 250 lbs. (113 kg)
Sheet Rack: 250 lbs. (113 kg)
 Platform Height  32 ft. (9.75 m)
51 in. (1.3 m) floor
 Platform Size  Extended Length: 133.5 in. (3.39 m)
Retracted Length: 91 in. (2.31 m)
Roll-Out Deck: 42.25 in. (1.07 m)
Width: 46 in. (1.17 m)
Sheet Rack: 8 in. (20 cm)

Aerial Work Platforms is YOUR total Aerial Access Solution Provider.


3394RT Scissor Lift 1

3394RT Scissor Lift

3394RT Scissor Lift

3394RT Scissor Lift Features:

  • Larger platform and increased lift capacity
  • Optional one-touch leveling jacks for quicker setup
  • Maximum lift and lower time of 43 seconds gives you more time to get your work done
  • New twin-pump-powered 4WD for a higher level of performance over rough terrain

Quick Specs:

  • Platform Height Elevated – 33 ft
  • Overall Width – 7 ft 10 in
  • Platform Capacity – 2,250 lb

 

Aerial Work Platforms is YOUR total Aerial Access Solution Provider.


4069ERT Electric Scissor Lift

4069ERT Electric Scissor Lift

4069ERT Electric Scissor Lift

4069ERT Electric Scissor Lift Specifications:

  • 40-ft (12.2-m) Platform Height
  • Standard 4-Wheel Drive with Quad-Trax Traction Control
  • 48v DC Electric or 24.8 hp (18.5 kW) Diesel Power
  • Roll-Out Deck Extension with Incremental Lock Positions
  • Optional Outriggers with One-Touch Auto Leveling
  • Optional Pipe Rack/Sheet Material Clamps
  • 40% Gradeability
  • Two Full Steps Lower At 51€ Platform Entry Height
  • Fully Proportional Drive & Lift Control

4069ERT Electric Scissor Lifts Features:

Work Area 

  • Standard integrated sheet material rack designed and approved by the manufacturer
  • Super-low platform entry height
  • Roll-out deck extension with incremental locking positions
  • Standard swing gate110V Power to Platform

Performance

  • Standard 4-Wheel Drive with Quad-Trax Traction Control
  • Fully Proportional Drive and Lift Controls
Power
  • 48v 375 Ah (420 Ah optional) DC Electric or 24.8 hp (18.5 kW) Kubota Diesel Power

Serviceability

  • Lubrication-free scissor bearings
  • Easy maintenance access to mechanical and electrical components without raising platform or swinging out trays
  • Logically grouped components and numbered wiring for easy reference

Safety

  • Dedicated compartments protect electrical and hydraulic component
  • Emergency shut-off at platform and lower controls
  • Non-skid metal deck construction
  • Descent alarm
  • Drive speed interlock
  • Multi-axis tilt sensor
  • Multiple disc brakes, manual brake release
  • Scissor maintenance lock
  • 4-wheel automatic parking brake
 

 4069ERT Electric Scissor Lift Dimensions:

 Length  126 in. (3.2 m)
 Height  46 ft. (14 m)
  98.5 in. (2.5 m) stowed (top guardrail)
  78 in. (1.98 m) stowed (rails folded)
  51 in. (1.3 m) stowed (platform floor)
  43.5 in. (1.11 m) guardrail
  6 in. (15 cm) toeboard
 Width  69 in. (1.75 m)
 Weight  10,800 lbs. (4,900 kg)
 Ground Clearance  10 in. (25 cm)
 Wheelbase  94.5 in. (2.4 m)
 Turning Radius  79 in. (2 m) inside
 ENGINE & DRIVETRAIN  
 Drive System  4 wheel drive
 ELECTRICAL  
 Motor  Electric
 BATTERY  
 Battery  48V DC, 375Ah battery pack
 PERFORMANCE  
 Tires  26 x 12 in. (66 x 33 cm)
 Instrumentation  Proportional drive and lift controls
 Travel Speed  3.75 mph (6 km/h)
 Gradeability  40%
 Capacity  800 lbs. (360 kg) total lift
  250 lbs. (113 kg) roll-out deck
  300 lbs. (136 kg) sheet rack
 Platform Height  40 ft. (12.2 m)
 Platform Size Length (Extended): 166 in. (4.22 m)
  Length (Retracted): 118 in. (3 m)
  Width (Outside): 59 in. (1.5 m)

 

Aerial Work Platforms is YOUR total Aerial Access Solution Provider.


4069LE Electric Scissor Lift1

4069LE Electric Scissor Lift

4069LE Electric Scissor Lift

4069LE Electric Scissor Lift  Features:

  • Superior performance on or off slab
  • Rugged terrain tires take you anywhere you want to go
  • With optional hydraulic leveling jacks, uneven terrain is no problem
  • Double the duty cycle of other scissor lifts so you can stay on the job longer

Quick Specs:

  • Platform Height Elevated – 40 ft
  • Overall Width – 5 ft 9 in
  • Platform Capacity – 800 lb

 

 

Aerial Work Platforms is YOUR total Aerial Access Solution Provider.


4069RT Diesel Scissor Lift

4069RT Diesel Scissor Lift

4069RT Diesel Scissor Lift

4069RT Diesel Scissor Lift Specifications:

Length

126 in. (3.2 m)

Height

46 ft. (14 m)

98.5 in. (2.5 m) stowed (top guardrail)
78 in. (1.98 m) stowed (rails folded)
51 in. (1.3 m) stowed (platform floor)
43.5 in. (1.11 m) guardrail
6 in. (15 cm) toeboard
Width
69 in. (1.75 m)
Weight

10,800 lbs. (4,900 kg)

Ground Clearance

10 in. (25 cm)

Wheelbase
94.5 in. (2.4 m)
Turning Radius

79 in. (2 m) inside

Engine & Drivetrain

Drive System
4 wheel drive

Electrical

Motor
Diesel

Battery

Battery
48V DC, 375Ah battery pack

Performance

Tires
26 x 12 in. (66 x 33 cm)
Instrumentation
Proportional drive and lift controls
Travel Speed
3.75 mph (6 km/h)
Gradeability

40%

Capacity

800 lbs. (360 kg) total lift

250 lbs. (113 kg) roll-out deck
300 lbs. (136 kg) sheet rack
Platform Height

40 ft. (12.2 m)

Platform Size
166 in. (4.22 m) length extended
118 in. (3 m) length retracted
59 in. (1.5 m) outside width
Aerial Work Platforms is YOUR total Aerial Access Solution Provider.


4191ES Electric Scissor Lift

4191ES Electric Scissor Lift

4191ES Electric Scissor Lift-

This Product Has Been Discontinued

 

  • Fully proportional drive and lift controls
  • No-maintenance scissor bearings
  • Roll-out deck extensions with incremental locking positions
  • Non-skid steel deck construction
  • Large sheet loading entrance
  • Easy maintenance access without raising platform or swing-out trays
  • Quad-Trax„ 4wd power package
  • Outrigger support for platform stability on heavy duty jobs sites with €œone-touch€ auto leveling
  • Powered by eight 6V 375Ah Industrial, deep cycle batteries
  • Oscillating rear axle with 12€ (30.48 cm) ground clearance

4191ES Electric Scissor Lift Features:

Work Area

  • Roll-out deck extension with incremental locking positions
  • Large sheet loading entrance accommodates 48€ (1.22 m) material
  • 110V Power to Platform
  • Combination of wide beams and large pins in self-lubricating bearings for larger load bearing surface in scissor pivot areas

Performance

  • Fully proportional drive and lift controls
  • Oscillating rear axle with 12€ (30.48 cm) ground clearance
  • Quad-Trax„ 4wd Power Package
  • Engine/Power
  • Eight 6V 375 Ah Industrial, Deep Cycle Batteries

Serviceability

  • Lubrication-Free Scissor Bearings
  • Easy maintenance access to mechanical and electrical components without raising platform or swinging out trays
  • Logically grouped components and numbered wiring for easy reference

Safety

  • Dedicated compartments protect electrical and hydraulic components
  • Non-Skid Steel Deck Construction
  • Motion Alarm
  • Drive Speed Interlock
  • Multi-Axis Tilt Sensor
  • Multiple Disc Brakes, manual brake release
  • Scissor Maintenance Lock
  • Dual Automatic Parking Brake
  • Emergency shut off at platform and lower controls

 

4191ES Electric Scissor Lift Specifications:

 

 Length  144 in. (3.66 m)
 Height  Working: 47 ft. (14.5 m)
Maximum Drive: 41 ft. (12.5 m)
Stowed (Top Guardrail): 119 ft. (3 m)
Stowed (Rails Folded): 87.5 in. (2.22 m)
Guardrail: 44.5 in. (1.13 m)
Toeboard: 7 in. (18 cm)
 Width  91 in. (2.31 m)
 Weight  10,300 lbs. (4,670 kg)
 Ground Clearance  12 in. (30.48 cm)
 Wheelbase  102.5 in. (2.6 m)
 Turning Radius  Inside: 76 in. (1.93 m)
Outside: 195 in. (4.95 m)
 ENGINE & DRIVETRAIN
 Drive System  Planetary, 2-speed wheel motors
 ELECTRICAL
 Motor  Electric
 BATTERY
 Battery  (8) 6V 375Ah industrial deep cycle
 HYDRAULICS
 Hydraulic Tank Capacity  23 gal. (87 l)
 PERFORMANCE
 Tires  12 – 16.5 NHS outrigger
 Travel Speed  Stowed: 2.6 mph (4.2 km/h)
Raised: 0.5 mph (0.8 km/h)
 Gradeability  40%
 Capacity  Lift: 1,000 lbs. (454 kg)
Roll-Out Deck: 500 lbs. (227 kg)
 Platform Height  41 ft. (12.5 m)
74 in. (1.88 m) entry height
 Platform Size  Extended Length: 180 in. (4.57 m)
Retracted Length: 132 in. (3.35 m)
Roll-Out Deck: 48 in. (1.22 m)
 Raise/Lower Time  45/50 sec

 

 

Aerial Work Platforms is YOUR total Aerial Access Solution Provider.


4191RT Rough Terrain Scissor Lift

4191RT Rough Terrain Scissor Lift

4191RT Rough Terrain Scissor Lift- This Product Has Been Discontinued

 

  • Fully proportional drive and lift controls
  • No-maintenance scissor bearings
  • Roll-out deck extensions with incremental locking positions
  • Non-skid steel deck construction
  • Large sheet loading entrance
  • Easy maintenance access without raising platform or swing-out trays
  • Quad-Trax„ 4wd power package
  • Outrigger support for platform stability on heavy duty jobs sites with €œone-touch€ auto leveling
  • Powered by liquid-cooled engine
  • Multiple fuel selections(gasoline/liquid propane or diesel)
  • Oscillating rear axle with 12€ (30.48 cm) ground clearance

4191RT Rough Terrain Scissor Lift Features:

Work Area

  • Roll-out deck extension with incremental locking positions
  • Large sheet loading entrance accommodates 48€(1.22 m) material
  • 110V Power to Platform
  • Combination of wide beams and large pins in self-lubricating bearings for larger load bearing surface in scissor pivot areas

Performance

  • Fully proportional drive and lift controls
  • Oscillating rear axle with 12€ (30.48 cm) ground clearance
  • Quad-Trax„ 4wd Power Package
  • Engine/Power
  • Multiple Fuel Selections (gasoline/liquid propane or diesel)
  • Liquid-Cooled Engine

Serviceability

  • Lubrication-Free Scissor Bearings
  • Easy maintenance access to mechanical and electrical components without raising platform or swinging out trays
  • Logically grouped components and numbered wiring for easy reference

Safety

  • Dedicated compartments protect electrical and hydraulic components
  • Non-Skid Steel Deck Construction
  • Motion Alarm
  • Drive Speed Interlock
  • Multi-AxisTilt Sensor
  • Multiple Disc Brakes, manual brake release
  • Scissor Maintenance Lock
  • Dual Automatic Parking Brake
  • Emergency shut off at platform and lower controls

 

4191RT Rough Terrain Scissor  Lift Specifications:

 Length  144 in. (3.66 m)
 Height  Working: 47 ft. (14.5 m)
Maximum Drive: 41 ft. (12.5 m)
Stowed (Top Guardrail): 119 in. (3 m)
Stowed (Rails Folded): 87.5 in. (2.22 m)
Guardrail: 44.5 in. (1.13 m)
Toeboard: 7 in. (18 cm)
 Width  91 in. (2.31 m)
 Weight  9,700 lbs. (4,400 kg)
 Ground Clearance  12 in. (30.48 cm)
 Wheelbase  102.5 in. (2.6 m)
 Turning Radius  Inside: 76 in. (1.93 m)
Outside: 195 in. (4.95 m)
 ENGINE & DRIVETRAIN
 Engine Make  Kubota
 Engine Model  DF752
 Engine Type  Dual Fuel
 Fuel Type  Gas & LP
 Fuel Tank Capacity  15 gal. (57 l)
 Drive System  Planetary drive, 2-speed wheel motors
 HYDRAULICS
 Hydraulic System  Variable displacement
 Hydraulic Tank Capacity  23 gal. (87 l)
 PERFORMANCE
 Tires  12 – 16.5 NHS outrigger
 Travel Speed  Stowed: 3.8 mph (6.1 km/h)
Raised: 0.8 mph (1.3 km/h)
 Gradeability  45%
 Capacity  Lift: 1,000 lbs. (454 kg)
Roll-Out Deck: 500 lbs. (227 kg)
 Platform Height  41 ft. (12.5 m)
74 in. (1.88 m) entry height
 Platform Size  Extended Length: 180 in. (4.57 m)
Retracted Length: 132 in. (3.35 m)
Roll-Out Deck: 48 in. (1.22 m)
 Raise/Lower Time  34/40 sec.

 

Aerial Work Platforms is YOUR total Aerial Access Solution Provider.


4394RT Scissor Lift

4394RT Scissor Lift

4394RT Scissor Lift

4394RT Scissor Lift Features:

  • Larger platform and increased lift capacity
  • Optional one-touch leveling jacks for quicker setup
  • Maximum lift and lower time of 43 seconds gives you more time to get your work done
  • New twin-pump-powered 4WD for a higher level of performance over rough terrain

Quick Specs:

  • Platform Height Elevated – 43 ft
  • Overall Width – 7 ft 10 in
  • Platform Capacity – 1,250 lb

 

Aerial Work Platforms is YOUR total Aerial Access Solution Provider.

Aerial Work Platforms

1299 66th St., N., Ste 41694 St. Petersburg, FL 33710

Sales: 727-264-1900 Fax: 877-680-2958 Email: [email protected]

Duns: 06-672-7186 EIN: 59-367-2551 Cage: 6S1Y8


December 10, 2018