NE-SL-03/3.3-2.7 Truck Mounted Scissor Lift
NE-SL-03/3.3-2.7 Truck Mounted Scissor Lift Features:
– Type: Multi Stage Electro – Hydraulic Scissor Lift Platform
– Platform : 1800mm x 1400mm with 6 mm non slip MS checkered plate cladding on top.
– Removable tubular railings of 1000 mm height on three sides.
– Minimum height : Plush to the ground with a pit depth of 1000 mm or else 1000 mm above the ground when installed on the floor.
– Maximum height : 4300mm from ground.
– Travel Height : 3300mm
– Capacity : 2700 kgs.
– Base Frame : MS Frame with sufficient stiffeners duly to be grouted inside the pit or on RCC / PCC flooring.
– Scissor : Heavy duty box section with strengthening provided at load bearing points. All pins hard chrome plated with self lubricating bushes for smooth lift and low maintenance.
– Rollers : MS with case hardening and with phosphor bronze bush or UHMWPE sliding wear pads.
– Valves and controls of 24V DC. Return line filter, suction strainer, quality hardware and precision machined components make the unit robust.
– Landing Gates / cladding’s : To your scope if any.
– Painting : All painting on MS materials will be epoxy based. Standard color Golden Yellow with black safety stripes other color schemes available on request. Zinc chromatic primer is applied on the substrate after scuffing.
– Pit Dimensions if required: 1850 x 1450 mm with a depth of 1000mm.
1. All hydraulic cylinders proceeded by Pilot Check Valves, which will hold the lift in place even in the event of hose rupture.
2. Factor of Safety is 3 or more in the mechanical components.
3. In house design that is validated in licensed 3D software before manufacturing.
4. Relief Valve provided in hydraulic circuit against excessive pressures.
5. MCB in electric Circuit.
6. All pins hard chromed.
7. Self lubricating MU bushes will work trouble free
8. Hand Pump for operations in case of electrical failure
Aerial Work Platforms is YOUR total Aerial Access Solution Provider.