NE-MN-02/8.0-0.25 Truck Mounted Manlift
NE-MN-02/8.0-0.25 Truck Mounted Manlift Features:
Type: Two Stage Scissor Manlift Kit
Capacity : 250 kgs
Platform : 50 00 mm x 2400 mm with non slip MS Checkered plate cladding
Min. height : 2,000 mm from ground
Max. height : 8,000 mm from ground
Working height : 9,500mm from ground
Vehicle Required : 7000 kg GVW and 4200 wheelbase truck with PTO.
Stabilizers : Hydraulic stabilizers on all four corners duly interlocked with the movement of the platform
Railings : 910 mm high with lockable swing doors.
Power Source : By vehicle PTO. Emergency operations on DC and manual recovery by hand pump.
Operations : Operating panel on the platform as well as 24 VDC controls on the platform as well as the bottom. Hand pump operations get the platform down in case of emergency
Painting : Scuffing by abrasive sand wheel followed by two coats of phosphate and finally two coats of epoxy yellow paint.
1) Pilot check valve to lock the platform even if in case of a ruptured hose
2) Sturdy design with factor
3) All pins hard chromed
4) Relief Valve provided in hydraulic circuit against excessive pressures
5) Emergency Operation : For emergency Hand pump operation provided for bringing the lift down
6) Sufficient electrical and mechanical safety interlocks ensure safe operations
Aerial Work Platforms is YOUR total Aerial Access Solution Provider.