Need Help?: (727) 264-1900

2647ES Electric Scissor Lift



2647ES Electric Scissor Lift

2647ES Electric Scissor Lift Specifications:

  •  Fully proportional drive and lift controls
  •  No-maintenance scissor bearings
  •  Roll-out deck extension with incremental locking positions
  •  Non-skid, steel deck construction
  •  Large sheet loading entrance
  •  Single arm scissor provides easy access for maintenance. No need for swing-out stations or tight working conditions.
  •  Patented Powerlift2 elevating system – built strong and works tough
  •  High torque power package
  •  Higher capacity (up to 1,250 lbs/566 kg) expands applications and productivity

2647ES Electric Scissor Lifts Features:

Work Area

  • Roll-out deck extension with incremental locking positions
  • Large sheet loading entrance accommodates 48€ (1.22 m) material
  • 110V Power to Platform
  • Combination of wide beams and large pins in self-lubricating
  • bearings for larger load bearing surface in scissor pivot areas
  • Extra wide platform for spacious work area


  • Fully Proportional Drive and Lift Controls
  • High Torque Power Package
  • Engine/Power
  • Four 6V 220Ah Industrial Deep Cycle Batteries (245Ah on 3247ES)


  • Lubrication-Free Scissor Bearings
  • Specially designed hydraulic swivel fittings to reduce hydraulic hose binding and hose failure
  • Easy maintenance access to mechanical and electrical components without raising platform or swinging out trays
  • Logically grouped components and numbered wiring for easy reference


  • Dedicated compartments protect electrical and hydraulic components
  • Emergency shut-off at platform and lower controls
  • Non-Skid Steel Deck Construction
  • Motion Alarm
  • Drive Speed Interlock
  • Multi-Axis Tilt Sensor
  • Multiple Disc Brakes, manual brake release
  • Scissor Maintenance Lock
  • Dual Automatic Parking Brake
  • Automatic Pothole Protection

2647ES Electric Scissor Lift Dimensions:

 Length  99 in. (2.51 m)
 Height  Working: 32 ft. (9.92 m)
Platform: 26 ft. (7.92 m)
Stowed (Top Guardrail): 88.75 in. (2.25 m)
Stowed (Rails Folded): 70 in. (1.78 m)
 Width  47 in. (1.19 m)
 Weight  5,300 lbs. (2,404 kg)
 Ground Clearance  3.5 in. (8.89 cm)
0.75 in. (1.9 cm)
 Wheelbase  71 in. (1.8 m)
 Turning Radius  Inside: Zero
Outside: 94 in. (2.4 m)
 Horsepower  4 hp (2.98 kW) @ 3,000 rpm
 Drive System  Proportional drive and lift controls
Axle: Dual front wheel hydraulic
 Motor  Electric
 Battery  (4) 6V deep cycle, 220Ah @ 20 hr. rating
 Hydraulic Tank Capacity  4.5 gal. (17 l)
 Operating Pressure  Main: 2,750 psi (190 bar)
Lift: 2,500 psi (172.4 bar)
Steer: 900 psi (62 bar)
 Tires  Solid, non-marking rubber
16 x 5 in. (40.64 x 12.7 cm)
 Tracks  Wheel: 41 in. (1.04 m)
 Travel Speed  Raised: 0.62 mph (1 km/h)
Stowed: 2.5 mph (4 km/h)
 Gradeability  25%
 Capacity  3 occupants
Lift: 1,000 lbs. (454 kg) evenly distributed
Roll-Out Deck: 250 lbs. (113 kg)
 Platform Height  Guardrail: 43.4 in. (1.1 m)
Toeboard: 6 in. (15 cm)
 Platform Size  Extended Length: 133.5 in. (33.9 m)
Retracted Length: 91 in. (2.31 m)
Roll-Out Deck: 42.1 in. (1.07 m)
 Raise/Lower Time  30/35 sec.

Aerial Work Platforms is YOUR total Aerial Access Solution Provider.


There are no reviews yet.

Be the first to review “2647ES Electric Scissor Lift”

Your email address will not be published. Required fields are marked *